RMA 400 - Mini roller assembling
Characteristics
Assembly machine MRM for mini and midi paint rollers for integrated inline operation following the thermo fusion process. The process starts with the operator laying 2 blanks on the carousel followed by the automatic production steps of diameter drilling, pre-heating in 3 stages and forming of the ends. At the same time the plugs are pre-assembled with the bearings and fed to the assembly station by separate feeders. After the rollers have been mechanically turned and the pre-assembled plugs fed the parts are automatically assembled together by pressing. Finally the finished rollers are combed and ejected.
Features
- High efficiency
- High production capacity
Technical data
| Capacity | up to 1,800 pieces/h |
| Roller size | 60 - 190 mm (2.36" - 7.48") |
| Roller diameter - inner | 13 - 40 mm (0.5" - 1.57") |
| Area required | approx. 3.3 x 1.9 m (10.83 x 6.23 ft) |
| Compressed air supply | min. 6 bar |
| Electrical connection | 3 x 400 V/50 Hz, N/PE, 15 kW |
